Temperature Instrument Calibration in Green Bay
ISO/IEC 17025 accredited calibration for 4 related instruments — covering data logger, chart recorder, temperature controller, and more. NIST-traceable results with documented uncertainty throughout the Green Bay service area.
About Temperature Instrument Calibration
Temperature Instrument Calibration in Green Bay encompasses a family of related equipment calibrated under a shared accredited methodology. Each instrument category below is served with NIST-traceable reference standards, documented measurement uncertainty, and certificates issued under an ISO/IEC 17025 accredited quality management system.
Because these instruments share calibration methodology — including thermal stabilization, reference thermometer placement, and uncertainty analysis — they are consolidated on a single service page. Each subsection below details the specific instrument variant, and a dedicated quote can still be requested for any single item or a mixed manifest spanning the group.
Instruments in This Group
Data Logger Calibration
Data logger calibration is the process of verifying and adjusting the measurement accuracy of electronic temperature recording devices by comparing their readings against a known reference standard. Temperature data loggers are used across regulated industries to continuously monitor and record environmental conditions over time.
- Thermocouple Data Logger Calibration
- Multi-Channel Temperature Data Logger Calibration
Chart Recorder Calibration
Chart recorder calibration is the process of verifying and adjusting a chart recorder's measurement accuracy by comparing its readings against known reference standards traceable to the National Institute of Standards and Technology (NIST). Chart recorders are instruments that produce a continuous graphical record of one or more measured variables—such as temperature, pressure, or humidity—over time.
- Circular Chart Recorder Calibration
- Strip Chart Recorder Calibration
- Paperless Recorder Calibration
Temperature Controller Calibration
Temperature controller calibration is the process of verifying and adjusting the accuracy of temperature control instruments by comparing their readings and output responses against NIST-traceable reference standards. Temperature controllers regulate heating and cooling processes by receiving input from temperature sensors—such as thermocouples, RTDs, and thermistors—and modulating output signals to maintain a desired setpoint.
- PID Temperature Controller Calibration
- Profile Controller Calibration
- Single-Loop Temperature Controller Calibration
Temperature Transmitter Calibration
Temperature transmitter calibration is the process of verifying and adjusting the accuracy of a temperature transmitter's input-to-output conversion against traceable reference standards. A temperature transmitter receives a signal from a temperature sensor—such as an RTD, thermocouple, or thermistor—and converts it into a standardized output signal, typically 4–20 mA, for transmission to control systems.
- Head Mount Temperature Transmitter Calibration
- Thermocouple Temperature Transmitter Calibration
- RTD Temperature Transmitter Calibration
- HART Temperature Transmitter Calibration
Calibration Demand in Green Bay
Temperature Calibration Demand in Green Bay, WI
Green Bay is a major hub for food processing and packaging manufacturing in northeastern Wisconsin, creating strong demand for precise temperature calibration services. Schreiber Foods, headquartered in Green Bay with over 10,000 employees, operates large-scale dairy manufacturing lines where pasteurization and cold storage temperatures are monitored continuously. American Foods Group, a family-owned beef processor established in 1946, relies on calibrated temperature instrumentation throughout its slaughter and processing operations to ensure product safety. BelGioioso Cheese, also based in Green Bay, produces Italian specialty cheeses requiring strict adherence to aging and storage temperature specifications.
Beyond food processing, Green Bay Packaging operates one of the most modern recycled paper mills in the world at its Green Bay Mill Division. Industrial drying, coating, and curing processes at the facility demand accurately calibrated temperature sensors to maintain product consistency and energy efficiency. Schwabe North America, a pharmaceutical manufacturer located in Green Bay, is subject to stringent temperature validation requirements across production and storage environments.
Local Compliance Requirements
Food processing facilities in Green Bay are regulated under the FDA Food Safety Modernization Act (FSMA) and 21 CFR Part 117, which mandate documented preventive controls including temperature monitoring at critical control points. Wisconsin has adopted the 2013 FDA Food Code through the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), requiring licensed food establishments to maintain calibrated thermometers and verifiable temperature records. The Brown County Environmental Health Unit enforces these standards through routine facility inspections.
- USDA FSIS regulations require continuous temperature monitoring in meat and poultry processing facilities such as those operated by American Foods Group
- ISO/IEC 17025 accredited calibration ensures measurement traceability to NIST standards, satisfying audit requirements under FDA 21 CFR Part 117 and FSMA
- OSHA process safety management standards apply to industrial operations where temperature excursions pose worker safety risks
- Pharmaceutical manufacturing at facilities like Schwabe North America requires temperature instrument calibration compliant with FDA 21 CFR Parts 210 and 211